Meet the "baby" of the Phoenix HV line, complementing our reliable Phoenix HV-45, HV-85 and HV-110. Watch out, this baby sure packs a punch! Phoenix HV-30 easily handles 30 amps at up to 50 volts, that's 1,500 watts in a package that is nearly the same size as the standard Phoenix-35 controller. Use Phoenix HV-30 anywhere high-power and light weight are critical.
We are sure that it will bring a whole new dimension of power and efficiency to electric aircraft.
Use voltage, not amps to get the power that you need. An HV setup allows use of lower capacity cells and lighter wire gauges. This is a perfect recipe for small high-performance applications such as racers or small helis OR long endurance applications such as AULD or small UAVs.
Phoenix HV-30 is going to help you turn some heads!
See the Phoenix User Guide (1mb PDF) for more details on programmable options.
| Part # | PHXHV-30 |
| Max Input Voltage | 50 volts |
| Max Amp Draw | 30 amps |
| BEC | None |
| Throttle RF Shielding | Opto isolated throttle cable |
| Resistance | 0.005 ohms |
| Castle Link Compatible | Yes |
| Length | 2" with capacitors (50mm) |
| Width | 1" (25.4mm) |
| Height | 0.5" (12.7mm) |
| Weight | 1 oz with 4" wires (27 g) |
All Phoenix HV speed controls feature: |
- Safe "Power On"
- Microprocessor Controlled
- Tough surface mount construction
- Audible Arming Signal
- Auto Motor cut-off with reset
- Low torque "Soft Start": protects gear boxes and belt drives from shock
| - Smooth reverse exponential throttle
- Self-calibrating endpoints: maximizes usable stick travel
- Auto shut-down when signal is lost
- Simple setup: no complicated switches or wiring
|
